Fire Pump Controllers

Firetrol FTA1000 Electric Fire Pump Controller - Full Voltage Starting

Full voltage starting is simple, preferred, and the lowest cost whenever the utility or generator will permit this type of starting method.​​

Specifications

Specifications per model FTA1000
Type Approvals Operating Pressure
Electric UL, FM 0 - 600 psi
* To view a specific model product page click on the model name above.
ADDITIONAL TECHNICAL SPECIFICATIONS
Starting Method
Full Voltage - Across The Line
Motor Horsepower
3 - 600 (depending on voltage)
Operating Voltage
200 - 600 VAC
Short Circuit Current Rating
100,000 Amps RMS Sym. (depending on HP/Voltage)

Features

...
The following are included as standard with each controller:
 Main Disconnect Switch and Circuit Breaker
 Common User Interface Across Product Lines
 True RMS Metering
 Power Transfer Switch Option
 Solid State Pressure Transducer
 USB Host Controller
 Event and Data Logging
 Emergency Run Mechanism

Benefits

...
 Full Voltage (Across The Line) Starting
 Modbus Connectivity
 System Monitoring
 User Selectable Features

Services & Support

Support

Frequently Asked Questions
Q
1. What type of motor starting method should be utilized?
A
The answer is not always clear cut and straightforward. There are a number of factors to consider such as, the motor HP and voltage, is the fire pump operating on emergency power, does the local utility have restrictions on the size of the motor load or the maximum ampere draw? Any questions contact your local FTA representative or the factory.
Q
2. My fire pump is required to operate on emergency power. Do I need an automatic transfer switch with my fire pump controller?
A
Yes and be sure the fire pump transfer switch is provided as an integral unit with the fire pump controller.
Q
3. Since my fire pump is going to be connected to an emergency generator set, the gen set dealer has recommended a close transition starting method. What does this mean?
A
Solid state starters are closed transition as are wye delta closed and autotransformer. Contact your local FTA representative or the factory.
Q
4. What is the simplest and most cost effective starting method?
A
Across the line type starting is the simplest; there are limitations however. Contact your local FTA representative or the factory.
Q
5. Is the fire pump controller suitable for us as service equipment?
A
Yes, all electric fire pump controllers are required to be listed for use as service equipment.

Contacts

Sales In USA Change Location
GDS Services, Inc.
Email Contact +1 717 292 9403 Fax +1 717 292 5746
5301 Carlisle Road, P.O. Box 347 Dover Pennsylvania 17315
Product areas of focus: Fire Pump Controllers
ZESCO, Inc.
Email Contact 440 526 0603 Fax 440 526 0704
6500 Miller Road Cleveland Ohio 44141
Product areas of focus: Fire Pump Controllers
McPeak Company
Email Contact +1 315 453 0500 Fax +1 315 453 0117
111 Monarch Drive Liverpool New York 13088
Product areas of focus: Fire Pump Controllers
Rosemont Engineering, Inc.
Email Contact +1 978 453 9191 Fax +1 978 453 1919
225 Stedman St., Suite 34 Lowell Massachusetts 01851
Product areas of focus: Fire Pump Controllers
Flotronix Corporation
Email Contact 1 317 849 7377 Fax 1 317 849 7337
12574 Promise Creek Lane, Suite 122 Indianapolis Indiana 46038
Product areas of focus: Fire Pump Controllers
Applied Industrial Controls, Inc.
Email Contact +1 770 614 7022 Fax +1 770 614 7025
1860 South Lee Court Buford Georgia 30518
Product areas of focus: Fire Pump Controllers
Chicago Technical Sales, Inc.
Email Contact +1 630 239 2639 Fax +1 866 860 5410
2948 Kirk Rd. Suite 106 # 160 Aurora Illinois 60502
Product areas of focus: Fire Pump Controllers
RJH Technical Services, Inc.
Email Contact +1 813 655 7947 Fax +1 813 655 7546
PO Box 3658 Brandon Florida 33509
Product areas of focus: Fire Pump Controllers
Nelson Engineered Sales
Email Contact +1 651 631 0646 Fax +1 651 631 9453
P.O. Box 130247 St. Paul Minnesota 55113
Product areas of focus: Fire Pump Controllers
RAPCO Associates, Inc.
Email Contact +1 504 887 9500 Fax +1 504 889 0523
4515 Shores Drive, Suite 202, P.O. Box 7885 Metairie Louisiana 70010
Product areas of focus: Fire Pump Controllers

LATEST INDUSTRY TRENDS, TECHNOLOGIES AND SOLUTIONS

Availability & Uptime

Electric Fire Pump Controllers

Get industry compliant electric fire pump controllers to monitor, display and record fire pump system information. Completely conform to the latest edition of NFPA-20, Installation of Stationary Pumps for Fire Protection and NFPA-70 (Nati...

August 22, 2016
DCIM & IT Management

Evaluating the Promise of DCIM

May 30, 2016
Availability & Uptime

On the Edge of our Seats

April 4, 2016
DCIM & IT Management

Is Your Organization Ready?

DCIM is a business process, as much as a technology. As for any new process, it is important to have an internal plan which reflects your key business priorities, what you can expect from a DCIM implementation, and metrics for how to meas...

May 30, 2016