Power Transfer Switches

ASCO SERIES 300 Group G Power Transfer Switch

Automatically transfer critical loads in the event of a power outage with the ASCO SERIES 300. Rugged construction and proven performance assure the user of many years of reliability.​​

Best Suited For
  • Banking, Financial and Insurance
  • Broadcast and Entertainment
  • Construction and Engineering
  • Data Center/Colocation/Hosting
  • Education
  • Fire/Alarm/Security
  • Government
  • Healthcare
  • Manufacturing
  • Power Generation
  • Power/Gas Transmission and Distribution
  • Retail and Wholesale
  • Telecom
  • Transportation
Limited Guardian Warranty

Downloads

*To see model-specific downloads, you will need to go to the model-specific product page by selecting the model name in the specifications chart above.

Features

The SERIES 300 is listed to UL 1008 standard for total system loads
and CSA standard C22.2 for automatic transfer switches.
Meets NFPA 110 for Emergency and Standby Power Systems.
Easy-to-navigate 128x64 graphical LCD display with keypad provides LED indicators for switch position, source availability, not in auto mode, and alert condition.​

Benefits

No danger of the SERIES 300 ATS transferring loads to a dead source because the unique ASCO single-solenoid operator derives power to operate from the source to which the load is being transferred.
Integrated multilingual user interface for configuration and monitoring.
Adjustable time-delay feature prevents switch from being activated due to momentary utility power outages and generator dips
 

Services & Support

Support

Frequently Asked Questions
Q
How do I install the ATS?
A
The ATS should be installed following the procedure in the installation manual, wiring diagrams and the notes on the mounting diagrams
Q
What generator models are compatible with the ATS?
A
The generator must be equipped with 2 wire start, and connected to the engine start circuit of the transfer switch.
Q
How do I perform a transfer test?
A
Press transfer switch test button and hold it for 15 seconds or until the generator starts and a transfer occurs
Q
Can I replace the ATS under warranty
A
Yes, as long as the switch is within the warranty period. Contact ASCO Power Warranty for guidance on procedure.
Q
How do I contact a service technician?
A
Contact a local ASCO Services representative by calling the toll free hotline (1-800-800-2726), then go to option 2 then 3 on the prompt or connect with any customer service representative. They will transfer you to a local service technician’s office in your area.

Contacts

Sales In USA Change Location
ASCO Power Technologies (Maryland, Southern Delaware, Washington DC and VA
Email Contact 571 313 8041 Fax 703 342 0391
12310 Pinecrest Road Suite 204 Reston Virginia 20191
Product areas of focus: Power Transfer Switches, Paralleling Switchgear, Power Control and Monitoring
Support Change Location
ASCO Services, Inc.
50 Hanover Road Florham Park New Jersey 07932
Product areas of focus: Power Transfer Switches, Paralleling Switchgear, Power Control and Monitoring

LATEST INDUSTRY TRENDS, TECHNOLOGIES AND SOLUTIONS

Facility Optimization

What Causes "Dirty" Power?

Whether it's called a surge, a sag, a spike, a transient, a fluctuation, an interruption, or noise, "dirty power" is some type of abnormality in the electricity that runs your facility.

September 14, 2016
Availability & Uptime

Automatic and Manual Transfer Switches

August 9, 2016
Availability & Uptime

Specialty Transfer Switches and Switchboards

Protect your critical loads with ASCO low voltage automatic transfer switches and Vertiv switchboards that are designed for unique emergency power needs. Select from our line of automatic transfer switchboards, two-source or three-source ...

September 14, 2016